We have the equipment and experience to get the job done. Ways to move a shed.
Shed moving is for local moves, when our delivery schedule allows us the extra time.
How to move a shed across the yard. Empty the shed to minimise the weight; This is the #1 question we get. Across the yard, or across the state, we do it all.
Jacked up the shed, and lag bolted the axle to the shed. Or put it on the back of a pickup or flat bed trailer if you have to move it across town. If you're taking it across the city, state, or the country, find out from the public works office about transporting wide loads.
(please note that the majority of shed moves are moved within the 1 1/2 hour time period, if the shed site is accessible at both locations). Please fill out our contact form to receive a quote. Prepare to move the shed by bracing any panels that aren't already braced.
Now it’s time to get moving. Once everything is in place, you can now push the shed along the tracks you made, to its new location. A forklift is the next easiest method.
I made some improvements, this time making the axle out of a 4×6 pt post with 5/8 rods drilled into the ends, and enough space for three hf 10 wheels on each side. Shed moves across the yard: Lift the shed and insert rollers under the shed.
Place the pipes between the skids and tracks, lower the shed down and push to move… jack the back end of the shed up at least as high as the rollers and wood tracks combined, then block it up in place. Those are the most common methods. Dig under the shed so you can place jacks to lift it.
You will be surprised what you can do with the help of 4 to 8 neighbors. Gather your supplies now that you know your shed’s movability, it’s time to prepare for what that entails. Building height must be 11′ or less in order to be moved.
Of course the shed needs to be empty and you need enough room around the shed to actually move the shed to its new location. Probably would run a 300 bucks more or less. If the shed is in a tricky spot, some moving companies are able to lift the shed with a special crane using a winch.
Afterwards, place the pvc pipes or wooden dowels underneath it. First, use the 2x4s to create a “track” for the shed. If you’re moving a large shed, you will need a jack at each corner, or you may only need 2 jacks for smaller sheds.
That is because the shed will have support and you can get under the shed easier. Need to move your shed from front to backyard or vice versa? To load a trailer with a forklift, it helps if the shed is on skids.
They could roll it across the yard on the pvc. A crane will lift the shed up and over any debris. How much does it cost to move a shed?
This can be done by fastening a strap around the entire structure, such as a series of straps, ratchet straps, winch, or some other type of cable. To move the shed a short distance, create a conveyor belt out of sturdy pipes and boards and roll it to its new location, then gently ease it down. Our experts have years of experience and the proper equipment, licenses and permits needed for legal and safe shed relocation.
Once the 6″ pvc pipes are underneath the shed you are ready to roll. There are many, many ways to move a shed. Please measure and know the height, width and length of your shed.
Wooden sheds can be moved this way if they aren’t too heavy. The 4×6 split where i drilled in for the axle. Then, smoothly put the shed down on the
If you have unlimited funds, maybe you can rent yourself a crane that will pick up the entire structure. 99″ wide on outer rail and 74″ wide on the inner rail. This technique is good for metal sheds or plastic sheds.
Just get a few friends and put one on each corner and maybe one in between. To use a lift fork to move a shed, the key is to go slow. If you want to move your storage shed an inch, a mile, or to another town, call mainus construction.
You’ve gotta move the shed! (empty the shed it first). I moved and repositioned our 8×12 amish built wood shed solo with the pvc mentioned, a jack, some 4×4's for cribbing, etc.
This hourly rate covers the labor rate and use of truck and equipment. How do you move a shed that is in the backyard? Lift the shed and move it across the yard.
Want to take your shed / tiny home with you? Even if they have a wood floor. Across the state or across the yard we know how to move your storage shed the right way.
You can move even a large shed intact from one end of your yard to another. How to move a small shed is easy. I had to move the shed again.
Once you’ve got your shed in the position you want it, insert the wood blocks again and jack the shed down to the ground on each end. During the process, the shed will be raised up using jacks so that it can be loaded onto a flatbed trailer. Heck, you can even move the shed to another yard.
You may use a jack or just let your helpers lift the shed at the side near the truck while those at the back of the shed hold it up to prevent it from falling backward. You may need a permit and an escort vehicle. Once you start moving forward, each pipe will gradually move backwards until they’re no longer under the shed.
Most shed moves across the yard are possible! Push the shed forward on the pipes, so it rolls forward with them underneath. You can either move it by hand with pvc rollers or rent a forklift truck to drive the shed from one spot to another.
That’s so the shed doesn’t fall to the side if one of the pipes moves one way or another. You also want to make sure the forks are spaced apart to support all the shed. Let the four helpers lift the shed uniformly or move over the ramp into the truck.
We have the heavy lifting gear and years of experience required to move your storage shed safely and quickly. The easiest way to move your backyard shed is by using a crane or a forklift. Do yourself a favor and move the items inside far away enough from the shed that you’ll have sufficient room to move it without obstacles.
One person steer, one person push and move the rollers. Then, use one or two hydraulic floor jacks to lift the shed up off the ground. Determine how far you're moving the shed.
Keep in mind that the idea is to slightly cantilever the shed across the pvc pipe, rolling it gently across as you go, when the shed rolls off the rear pipes you simply bring them to the front and continue rolling. Let four people be set around the corners of the shed. Get a landscaping crew on a spare saturday, and have 3 or 4 pieces of 4 pvc pipe handy.
We will take the hassel out of moving your shed. Now it’s time to move your shed. Once it is secure on the trailer bed, it will be driven to the new location, dropped off and leveled in the new area.
Take a 2×4 that will run the length of your interior wall, from the top corner to the opposite bottom corner, and screw into each stud. If you need to change the position of the shed, you can easily do this by having one person on each corner swivel the shed around to the proper position.