How To Measure A Western Saddle For Your Horse

Measure the distance between the two points that the leather comes to on either side. Place your tape ever so slightly below that joint on the inside of the gullet on the fleece and measure across to the other side in the same place.

Measuring western saddle seat sizes My True Love

The best way to measure for your seat size is to take the measurement of your thigh from your knee to your buttocks.


How to measure a western saddle for your horse. Keep in mind that the saddle maker’s measurement will be recorded as wider because he measured the saddle tree before it had leather and fleece put on it. A narrow or tight angle will make contact at the bottom of the bars, not the top. Relax your legs so they hang against your horse’s sides.

Measure each horizontal line as accurately as possible and write the measurement above the line. Because of the confusion, it's helpful if those selling a saddle would take a pic of the front, a visual reference. Make sure the front is near the end of the withers.step 2, place the saddle on your horse's back.

There will be no chance of sores and incontinence because your horse can move his body parts freely. Your rump should rest on the base of the cantle, but should not be pressed against the back of the cantle. Step 1, place the saddle pad on the horses back.

Is taken where the gullet joins the skirt and subtract 1/2 to allow for skirt thickness. Place the saddle directly on their back , making sure that it does not block the front shoulder or extends beyond the last rib in their ribcage.step 3, check the. Begin by sitting in the “sweet spot” of your western saddle:

For this step, all you really need is the saddle and a tape measure. A poor fit saddle makes it uncomfortable for the rider and the horse to perform as per their best abilities. One way to do this is to place a rolling object on the seat;

How to determine your cinch size: For your saddle’s fit and proper positioning on your horse, it is important that your horse’s cinch fit well, too. If you can vertically fit your whole hand between the bottom of the gullet and the wither, the tree is probably too narrow.

Balance is what you should look for first. Sit in a saddle, on a horse, with your legs out of the stirrups, with your legs/knees as straight down as possible, ideal is your heels in line with your shoulders. Stand your horse square on a level surface.

It will roll to the lowest point. Rigging is the method of safely securing your saddle to your horse for a snug fit. Contact the manufacturer if you can.

You’ll notice how the leather skirt seems to come up at and angle under the saddle’s horn. Find the card that fits the best. With your ruler starting at the mark at point a, measure down each side of the curve and make a mark precisely at 14.5cm (point b and point c) and then at 17.5cm (point d and point e).

The numbers at the front of the card s represent the distance from b to a (just behind the scapula) in this case about 8 1/2″ for this horse. Now draw a horizontal line to connect point b to point c and another line to connect point d to point e. Mold and press the wire.

Start from your horse's shoulders, and run the tape along your horse's body all of the way to the hind legs. Place the saddle on the horse’s bare back without a pad. Not so far back that your jeans pockets are rubbing against the cantle yet not scooted so far forward that you’re snuggling against the swell.

Read morehow to fit a western saddle to a rider? There should be approximately four inches between the front of your body and the fork (or swells). There should be two to three fingers space between the top of the wither and the gullet of the saddle.

To compare a western saddle to your horse’s width, view your saddle from the front. Below is an illustrated photo showing how to measure a western saddle seat. Your horse will always be sound and comfortable if the western saddle fits accurately.

Multiply this measurement by two and you will have a good idea of what size cinch your horse needs. Locate the tape marked b, on the rock card you will see a notch cut out of the profile card place that notch on the tape at b. How to tell if the saddle fits

Put the saddle on your horse and make sure that it is two fingers behind the shoulders and secured with the girth straps. In the video above, professional’s choice representative and professional rodeo cowboy, brodie poppino, shares how to properly measure and fit a cinch to your saddle. Bar angle is not often measured but the angle needs to be as close to the angle of the horse’s back as possible.

A rawhide covered tree will fit differently and often much better than a ralide. With your other hand place your measuring tool over the withers. With gentle pressure locate the back edge of the shoulder blade (scapula) with one or 2 fingers and keep them there.

The worst thing is you are choking your horse as you pull tighter and tighter. Measure your horse from the center of the underside of his chest in the girth area. When all else fails, the best and easiest way to determine western saddle tree sizes is to contact the manufacturer of the saddle and asking them.

Keep in mind that western saddle seat size refers to rider fit and has nothing to do with how the saddle fits the horse. Let your feet dangle out of the stirrups. Mold the saddle fitting measuring tool to your horse or mule.

A narrow gullet width will keep the saddle perched higher. A wider spread will drop further down on the horse’s back. Once you have this measurement, you can begin comparing it to the length of your saddle.

Bring the tape up to just below the widest part of his ribcage (about 4 above and behind the elbow). Keep your eyes forward and your. To measure the cap, just measure from one side to the other.

Your saddle will slide forward and back, your cinch/girth will slide down towards the widest portion of the horse (the apex of the curve of the rib cage) and your saddle will slide from side to side, if not under the belly of the horse. Place the marked center point directly above the withers, with eight inches of wire to each side, and directly over where your fingers are marking the back edge of the scapula. Place the tape measure at your inseam and run down the inside of your leg to the edge of the ball of your foot with the type of riding boot on you usually wear.

Western saddle seat sizes are easy to measure accurately. To measure the post and the cap, use a straight edge to measure from the bottom of the horn to where the cap begins. Putting a saddle pad on the horses back prevents the leather from rubbing the horse.

Getting The Right Saddle For Your Horse Equestrian

Measuring your saddle Horse and human, Horse training

Do You Have the Right Size Cinch For Your Horse? Cinch

Measuring and Fitting Horse Boots, Hoof Boots, Saddle

How To Measure Your Horse for English & Dressage Girth

eb266ebcb3dd30995dd5527e5a302ceb used saddles western saddles
Measuring, Describing, and Knowing Your Western Saddle

This 20yearold gelding has a significant sway back and

sizing a seat for a Western saddle Choosing a Seat Size

Get your EasyMeasure Gullet Gauge from HorseEtc, we

Learn about how to measure your horse for a blanket

Ever wonder how to measure for a proper saddle pad fit

How to Measure English Saddles English

Properly Fitting a Cinch . We Know

Learn about how to measure your horse for a blanket

Farm Life by Haley Smith Horse care, Horses

How to Measure for an English Saddle English saddle

Saddle Fitting Guide Horse & Pony Pinterest

Measuring for saddle size for rider The Tack Room

Measuring and Fitting a Western Saddle Horse saddles

Leave a Reply

Your email address will not be published. Required fields are marked *